AR Sandbox Part 12: It Works!

 

With the new hardware setup, the already installed code ran like a charm (although there were a few kinks) and the sandbox was now functional! 

 

It is now fully reactive to the topography of the sand, and coolest of all: water simulation! You can hold your hand near the kinect, and water will be simulated falling from it, responding dynamically to the topography, and forming realistic bodies of water, flowing down mountains in handmade rivers into bodies of water.


 

Mission success! And for far less than the $15,000 that these things normally cost. 

Now what to do with it?

Comments

Post a Comment

Popular posts from this blog

Sandbox Part 5: Software

Image
Using linux command line to download software After the linux system was up and ready, it was time to start downloading the software for the sandbox. Now normally, the massive number of software packages and whatnot would be a huge pain to deal with, but, thanks to System76 and the linux command line, this was made a whole lot easier.  to download the files I needed, I simply had to enter instructions to the command line, and the software would download by itself. Here is the command: sudo add-apt-repository -ys ppa:system76-dev/weekend-project sudo apt-get update sudo apt-get install arsandbox This would prompt it to ask you some information, which could be gained by entering: whoami Finally, I had to add myself to the vrui-grp group by entering (with username replaced with the info gained through whoami): sudo adduser  USERNAME  vrui-grp   This finished the software download I needed to do while I waited for parts to arrive. The next step would be to build
Read more

Sandbox Part 1: Computer Parts

Image
In order to run the water Simulation Software used by the sandbox, many sites recommend buying a computer, generally for around $600-700. However, due to my past experience with pc building, and some inspiration, I figured I would build my own. I tried my best to cut their price in half, and succeeded. For this build, I used an optiplex 980 desktop I purchased for a very low price on ebay, along with a few components to upgrade it. Here is my parts list: 1 optiplex 980 desktop with: 4x2GB sticks of ddr3 RAM                          $68 for all (USED) Core i7 870 CPU 256 GB hdd                              RX 580 8gb GPU                                           $125 (USED) 240gb crucial BX500 SSD                             $32   (NEW) Rosewill 750 watt Bronze PSU                      $37   (REFURBISHED) 8 pin ITX to ATX PSU adapter                      $10   (NEW) USB WIFI (optional)                                      $13   (NEW) Case (can be done differently) 4*
Read more